Support

Function & Handling

How does the miniPAD work?

The miniPAD is a combination lock, that does not need any key. The lock is opened by entering the correct code.

What makes it easier to handle it?

A quick and easy control without keys or transponders.

On what technology is it based on?

The miniPAD contains electronic equipment powered directly from a battery. These electronics evalute the input and unlock the miniPAD with a small  motor.

In which direction does the lock open?

Currently the miniPAD will be offered for door hinged on the right.

Handling - Do I need any keys?

No, the miniPAD is operated solely only by entering a code.

Colour signals

Feedback during the operation
Actions: Signals:
Entering the first number, lock active.
Entering the check button.
User code is accepted.

Entering wrong code. — — —

Entering multiple time wrong code.
Time out.
Trying again after signals are off.

— — ... — —

Broken lock, please send in for repair.

• • ... • •

Battery warning, please change the battery.
Signals are shown after entering the first number of the code.

• • ... • •

 

Standardsoftware miniPAD

What is the fixed mode?

The standard setting for the miniPAD is the fixed Mode. This mode is especially designed for a quick and uncomplicated use and therefore lends itself as an ideal introduction in the use and handling of the miniPAD.
In this mode, the lenght of the codes (both UserCode and Mastercode) is fixed to 4 digits.
Thus, you can just reuse numbers of other devices such as card PINs and therefore, there is no need to remember additional code numbers.

What is the free mode?

The free Mode is especially designed for environments where users often change the cabinet.
The standard setting for the miniPAD in not closed so you can turn the handle and its open. To lock the lock you have to close the door,
enter your individual code and confirm with the check button. To open the lock you have to enter the same code. After this the lock is permanent open and is avialable for the next user.

Can I change the mode?

No - please contact your dealer.

Energy management

Are there batteries in the miniPAD?

Yes, there are up to 2 lithium battery of the typ CR123.

What is the battery life?

Due to the highly efficient energy management, developed by Beloxx, you can use the lock without battery change up to 10 years* (max. 100.000 closures).

* with 2 batteries and only in fixed mode.
What can I do when both battery are empty?

You can connect with a special "emergeny power adapter" and an external power supply - so you can handle the miniPAD even if the batteries are empty.

How do I replace the battery?

The battery case will be accessible when you open the battery cover on the backside.

Garantee / Material / Specs

How long does the miniPAD last?

Due to the highly efficient energaymanagement, developed by Beloxx, you can use the lock
without batterychange up to 10 years (max. 100.000 closures).

How long is the guarantee?

We grant one year warranty.

How secure is the lock?

The security matches that of common cabinet locks. The miniPAD is not a vault-type lock and is not protected against vandalism. However, it is usually easier to break open a cabinet door than to manipulate or destroy the miniPAD. Additional security in comparsion with normal locks results from the fact that no keys are used, so they cannot be lost or stolen. Breakage of the key in the lock also cannot happe with the miniPAD.